Evaluation of Risk Factors associated with Caries Development after Full-mouth Rehabilitation for Early Childhood Caries Under General Anesthesia.

AIM: To evaluate the risk factors associated with caries development after full-mouth rehabilitation for early childhood caries (ECC) under general anesthesia. MATERIALS AND METHODS: A total of 100 children diagnosed with ECC requiring full-mouth rehabilitation under general anesthesia were recruited for the study. At baseline, caries status, plaque index, Streptococcus mutans count, and Lactobacillus count were evaluated. The risk assessment for caries was evaluated using a cariogram. Children were recalled after 12 months for evaluation. All children returned for the recall and data was recorded at the recall visit. Children were grouped into caries-free or caries recurrent based on the absence or presence of caries. Chi-square tests and student's t-test were used for statistical analysis using the statistical package for the social sciences (SPSS), version 23. RESULTS: All 100 children returned for follow-up. 76% of the children developed new carious lesions in a period of 1 year. A statistically significant association between caries recurrence and S. mutans count and caries risk assessment (CRA) score was found (p < 0.001). No significant associations were seen between parental education levels and the oral health practices of the child. CONCLUSION: Children treated under full-mouth rehabilitation for ECC under general anesthesia are at risk for developing new carious lesions after treatment. New carious lesions are strongly correlated with the presence of S. mutans, and high cariographic risk scores serve as an indication of future caries. Early childhood caries may be avoided if children are more diligent in practicing good dental hygiene. CLINICAL SIGNIFICANCE: Relapse of caries after full-mouth rehabilitation under general anesthesia can affect the quality of life of children. Preventive measures should be initiated and reinforced to prevent the occurrence of new carious lesions after full-mouth rehabilitation. How to cite this article: Mathew MG, Jeevanandan G, Maganur PC, et al. Evaluation of Risk Factors associated with Caries Development after Full-mouth Rehabilitation for Early Childhood Caries Under General Anesthesia. J Contemp Dent Pract 2024;25(1):85-91.

A novel approach to full-mouth rehabilitation of dentinogenesis imperfecta type II: Case series with review of literature.

RATIONALE: Dentinogenesis imperfecta (DI) is an autosomal-dominant disorder. The most common clinical manifestations, including obliterated tooth tissues and severe tooth wear, usually lead to tooth extractions. It remains a great challenge for dentists to preserve the residual tooth tissue and establish the esthetics and occlusion of dentitions. PATIENTS CONCERNS: 25-year-old twin sisters, who had suffered from dentinogenesis imperfecta type II for more than 10 years, presented with continuous tooth wear and discomfort from wearing a removable partial denture for more than 3 years. DIAGNOSIS: Intraoral examination showed extensive tooth wear with enamel exfoliation and typical amber-brown color with an opalescent discoloration. Their panoramic radiographs revealed completely obliterated tooth tissues and severe tooth wear. INTERVENTIONS AND OUTCOMES: The dentitions were restored with post-and-core crowns and pin lays after preparing root post paths and pin holes guided by computer-aided design/computer-aided manufacturing (CAD/CAM) procedures, resulting in a successful repair. LESSONS: Severe tooth wear and tooth tissue obliteration are typical clinical manifestations in DI-affected dentitions, increasing the complexity and difficulty in dental restorations. Early diagnosis and appropriate treatments are essential to achieve a favorable prognosis. CAD/CAM procedures, permitting accurate and effective treatment, possess promising potential in the treatment of DI-affected dentitions.

CAD/CAM full-mouth rehabilitation of an elderly patient: One-piece digital complete denture meets multilayered zirconia with gradient technology.

OBJECTIVE: This article highlights a CAD/CAM complete-mouth rehabilitation in an 82-year-old patient by means of a complete maxillary prosthesis and mandibular implant- and tooth-supported fixed restorations made from multilayered zirconia. CLINICAL CONSIDERATIONS: Comprehensive complete-mouth rehabilitations in elderly patients with adaptation of the occlusal vertical dimension (OVD) often present particular challenges. This applies especially when exacting functional and esthetic requirements are to be met and the treatment should not cause the patient too much effort, still ensuring the highest level of quality and efficiency and a low intervention rate. CONCLUSION: The digital approach used for the present patient allowed for an efficient treatment procedure, facilitated virtual evaluations using a face-scan, and enhanced the predictability of the prosthodontic outcome. The approach enabled some steps required in the conventional protocol to be omitted, resulting in a straightforward clinical treatment with minimal strain on the patient. CLINICAL SIGNIFICANCE: Because of the comprehensive recording of extraoral and intraoral data, for example with a facial scanner, it was possible to transfer a digital replica of the patient to the dental laboratory technician. With this protocol, many steps can be performed in the absence of the real patient.

Is scanning under rubber dam isolation a feasible approach for the execution of indirect restorations? / O escaneamento sob isolamento absoluto é uma técnica viável para execução de restaurações indiretas?

Objective: The aim of the study was to report the aplicability of intraoral scanning while rubber dam isolation is in place. Material and Methods: Female patient, 50 years old, required restorative procedures on teeth 35 and 37. An intraoral scan was initially performed on both arches. Isolation was carried out from 33 to 37, tooth preparation and immediate dentin sealing were carried out. A new scan with the rubber dam in place was performed and a CAD/CAM lithium disilicate hybrid block was digitally designed, milled, crystallized and cemented under the tooth surface with the rubber dam still in position. After completing this stage, the rubber dam was removed, the occlusion was verified, presenting excellent aesthetic and functional results. Results: The absolute isolation process used in the present study works as an excellent device for gingival retraction. Conclusion: The absolute isolation can be recommended in clinical activities of intraoral scanning favoring the quality of the final result of treatments (AU)

Objetivo: O objetivo do estudo foi relatar a aplicabilidade do escaneamento intraoral sob isolamento absoluto. Material e Métodos: Paciente do sexo feminino, 50 anos, necessitou de procedimentos restauradores nos dentes 35 e 37. Uma varredura intraoral foi inicialmente realizada em ambos os arcos. O isolamento absoluto foi feito de 33 a 37, permitindo a realização do preparo dentário e selamento imediato da dentina. Um novo escaneamento com o dique de borracha colocado foi realizado e um bloco híbrido de dissilicato de lítio CAD/CAM foi projetado digitalmente, fresado, cristalizado e cimentado sob a superfície dentária ainda com o dique de borracha em posição. Após a finalização dessa etapa, o dique de borracha foi removido, a oclusão foi verificada apresentando ótimos resultados estéticos e funcionais. Resultados: O isolamento absoluto utilizado no presente estudo funciona como um excelente dispositivo para retração gengival. Conclusão: O isolamento absoluto pode ser recomendado em atividades clínicas de escaneamento intraoral favorecendo a qualidade do resultado final dos tratamentos (AU)

Facetas em resina composta com fechamento de diastemas para harmonização do sorriso: relato de caso / Composite resin veneers with diastema closure for smile harmonization: A case report / Facetas de resina compuesta con cierre de diastemas para harmonización de la sonrisa: Informe de caso

Introdução:A estética do sorriso é um aspecto valorizado pela sociedade atual, o que demanda que os profissionais de odontologia estejam atualizados sobre materiais dentários e novas técnicas para alcançar resultados estéticos restauradores de alta qualidade. A resina composta é frequentemente utilizada para simplificar a reabilitação oral, pois oferece facetas dentárias que combinam excelente estética e durabilidade. Objetivo:Este artigo tem como objetivo relatar um caso clínico de reabilitação estética utilizando facetas em resina composta com fechamento de diastemas.Relato de caso:Uma paciente do sexo feminino, com 24 anos de idade, procurou a clínica escola de odontologia com insatisfação em relação à estética do seu sorriso. A pacienteapresentava diastemas, restauração defeituosa e desproporção no tamanho dos dentes anteriores. O tratamento consistiu em um clareamento caseiro prévio, seguido pela confecção de facetas diretas em resina composta para fechamento dos diastemas e correção da desproporção dentária. Foram utilizados um Jig Estético e o software Digital Smile Design (DSD)para o planejamento, além de um mock-up em resina bisacrílica. Após a confecção das facetas, foi obtido um resultado estético final satisfatório. O caso incluiu um total de oito facetas,dos dentes 14 ao 24. Conclusão:O tratamento utilizando restaurações em resina composta proporcionou à paciente uma reabilitação estética, funcional e biológica (AU).

Introduction:Smile aesthetics is an aspect valued by today's society, which demands that dental professionals are up to date on dental materials and new techniques to achieve high-quality restorative aesthetic results. Composite resin is often used to simplify oral rehabilitation, as it offers dental veneers which combine excellent aesthetics and durability. Objective:This article aims to report a clinical case of aesthetic rehabilitation using composite resin veneers with diastema closure. Case report:A24-year-old female patient came to the dental school clinic with dissatisfaction regarding the aesthetics of her smile. The patient had diastemas, defective restoration and disproportionate anterior teeth size. The treatment consisted of prior at-home tooth bleaching, followed by creating direct composite resin veneers to close the diastemas and correct tooth disproportion. An Aesthetic Jig and the Digital Smile Design (DSD) software program were used for planning, in addition to a mock-up in bisacrylic resin. After treatment, a satisfactory final aesthetic result was obtained. The case included a total of eight veneers, from teeth 14 to 24. Conclusion:Treatment using composite resin restorations provided the patient with aesthetic, functional and biological rehabilitation (AU).

Introducción: La estética de la sonrisa es un aspecto valorado por la sociedad actual, hecho que demanda de los profesionales de odontología actualización constante sobre los materiales dentarios y nuevas técnicas para alcanzar resultados estéticos restauradores de altacualidad. La resina compuesta es frecuentemente utilizada para simplificar la rehabilitación oral, pues ofrece facetas dentarias que combinan excelente estética y durabilidad.Objetivo: Este artículo tiene como objetivo relatar un caso clínico de rehabilitación estética a partir de la utilización de facetas en resina compuesta con cierre de diastemas. Informe de caso: Una paciente, del sexo femenino, con 24 años de edad, buscó la clínica-escuela de odontología insatisfecha con la estética de su sonrisa. La paciente presentaba diastemas, restauración dentaria defectuosa y desproporción en el tamaño de los dientes anteriores. El tratamiento consistió en un blanqueamiento casero previo, seguido por la confección de facetas directas de resina compuesta para cierre de los diastemas y corrección de la desproporción dentaria. Fueron utilizados un Jig Estético y el software Digital Smile Design(DSD) para el planeamiento, además de un mock-upen resina bisacrílica. Tras la confección de las facetas, fue obtenido un resultado estético final satisfactorio. El caso incluyó un total de ocho facetas, de los dientes 14 al 24.Conclusión: El tratamiento a partir de restauraciones en resina compuesta proporcionó a la paciente una rehabilitación estética, funcional y biológica (AU).

Confecção de guia multifuncional para planejamento de reabilitação implantossuportada: relato de caso / Preparation of a multifuncional guide for the planning of implant-supported rehabilitations: case report / Elaboración de una guía multifuncional para la planificación de rehabilitación implantosoportada: informede caso

Introdução:Em busca da estética e da função mastigatória,é cada vez mais crescente aprocurapor reabilitações implantossuportadas. O guia multifuncional surgepara orientar a disponibilidade óssea e contribuir no planejamento da instalação tridimensional dos implantes, seguindo os princípios do planejamento reverso.Objetivo:Descrever, por meio de um caso clínico, a possibilidade de obtenção de resultados de excelente previsibilidade em coroas unitárias implantossuportadas, por meio do uso de guias multifuncionais, no planejamento do início ao fim de tratamento.Relato decaso:Paciente A.M.F, 44 anos, sexo feminino, compareceu à clínica de Prótese dentária do Departamento de Odontologia/UFRN com queixa de insatisfação da sua prótese removível e harmonia do sorriso. Ao exame clínico e radiográfico, observou-se ausência do elemento 12, apresentando um espaço interoclusal de 5mm e distância médio-distal de 7mm. Foi confeccionado o guia em resina acrílica, o qual foi preenchido o espaço desdentado com um dente de estoque. Em seguida, o dente deste guia teve seu centro perfurado com uma broca esférica para peça reta na região de cíngulo e com isso, preenchida com guta percha em bastão. Após isso, o paciente foi encaminhado para realizar uma tomografia computadorizada cone beam com o guia multifuncional em posição.As imagens obtidas permitiram o planejamento para instalação do implante, como inclinação e posicionamento favorável, bem como ausência de disponibilidade óssea na região. Além disso, o guia funcionou em outras etapas do tratamento da paciente, como na fase provisória.Conclusão:Os guias auxiliam em diversas fases do tratamento e permitem maior previsibilidade dos resultados em reabilitações protéticas unitárias implantossuportadas, apresentando-se como um dispositivo promissorpara ocorreto posicionamento do implante (AU).

Introduction:In search of esthetics and improved masticatory function, the demand for implant-supported rehabilitation is increasing. Multifunctional guides emerge to assess bone availability and help plan the three-dimensional installation of implants, following the principles of reverse planning. Objective:To describe, through a clinical case, the possibility of obtaining excellent predictability in implant-supported single crowns, through the use of multifunctional guides, inthe planning of a treatment from beginning to end. Case report:Patient A.M.F, 44 years old, female, came to the Prosthodontics clinic at the Department of Dentistry/UFRN complaining of dissatisfaction with her removable prosthesis and the harmony of her smile. Clinical and radiographic examination revealed the absence of element 12, with an interocclusal space of 5mm and a mid-distal distance of 7mm. The acrylic resin guide was made and the edentulous space was filled with a stock tooth. The center of theguide tooth was then drilled with a spherical straight-bit burr in the cingulum region and filled with gutta-percha stick. The patient was then referred for a cone beam computed tomography with the multifunctional guide in position. The images obtained allowed planning for implant installation, such as favorable inclination and positioning, as well as the absence of bone availability in the region. In addition, the guide was effective during other stages of the patient's treatment, such as the provisional phase.Conclusion:The guides assist in various phases of treatment and allow greater predictability of results in implant-supported single prosthetic rehabilitations, presenting themselves as a promising device for correct implant positioning (AU).

Introducción:En busca de estética y función masticatoria, la demanda de rehabilitaciones implantosoportadas es cada vez mayor. La guía multifuncional hasurgido para orientar la disponibilidad ósea y ayudar a planificar la instalación tridimensional de implantes, siguiendo los principios de la planificación inversa. Objetivo: Describir, a través de un caso clínico, la posibilidad de obtener una excelente predictibilidad en coronas unitarias implantosoportadas, mediante el uso de guías multifuncionales, en la planificación desde el início hasta el final del tratamiento. Informe de caso: Paciente A.M.F, 44 años, sexo femenino, compareció a la clínica de Prostodoncia del Departamento de Odontología/UFRN quejándose estar insatisfecha con su prótesis removible y con la armonía de su sonrisa. El examen clínico y radiográfico reveló la ausencia del elemento 12, con un espacio interoclusal de 5 mm y una distancia medio-distal de 7 mm. Se confeccionó una guía de resina acrílica y se rellenó el espacio edéntulo con un diente provisorio. A continuación, se perforó el centro del diente guía con una broca recta esférica en la región del cíngulo y se le rellenó con gutapercha en barra. Posteriormente, el paciente fue remitido a una tomografía computarizada cone beamcon la guía multifuncional en posición. Las imágenes obtenidas permitieron planificar la instalación del implante, como inclinación y posicionamiento favorables, así como la ausencia de disponibilidad ósea en la región. La guía también funcionó en otras fases del tratamiento del paciente, como en la fase provisional. Conclusión:Las guías ayudan en varias fases del tratamiento y permiten una mayor previsibilidadde los resultados en rehabilitaciones protésicas unitarias implantosoportadas, presentándose como un dispositivo prometedor para el correcto posicionamiento de los implantes (AU).

A conservative full-mouth ceramic rehabilitation for a severely worn dentition.

There is a constantly growing prevalence of tooth wear in dentistry. The present case report describes a rehabilitation through ceramic restorations of a severely worn dentition based on a conservative intervention, adequate restorative material selection, and adhesive bonding strategies. A 36-year-old patient with a mainly esthetic complaint presented with signs of tooth wear caused by erosion and attrition. Preparations were performed guided by the diagnostic planning. The full-mouth rehabilitation, combined with the correction of the vertical dimension of occlusion, was split into quadrants, and lithium disilicate partial restorations were fabricated. The proposed rehabilitation was based on the maximal preservation of the remaining tooth structure and the adequate selection of restorative materials and adhesive bonding strategies.

Rendimiento Clínico de las Restauraciones Adhesivas con Resina Compuesta en Casos de Pacientes con Desgaste Severo e Incremento de Dimensión Vertical: Revisión de Literatura Sistematizada / Clínical Performance of Adhesive Restorations with Composite Resin in Cases of Patients with Severe Wear and Increased Vertical Dimension: Systematized Literature Review

El desgaste dental severo se describe como la pérdida sustancial de la estructura dental, con exposición de la dentina y pérdida significativa de igual o más de 1/3 de la corona clínica. El uso de materiales compuestos de resina permite al clínico ser más conservador, debido a su aplicación mínimamente invasiva. Además de ello, son relativamente económicas, proporcionan buena estética general, así como un buen rendimiento y facilidad en la reparación. El objetivo de esta revisión de literatura sistematizada es recopilar información disponible en la literatura referente a cuál es el rendimiento clínico de las restauraciones adhesivas con resina compuesta en casos de pacientes con desgaste severo e incremento de la dimensión vertical como objetivo rehabilitador. Se analizaron artículos entre los años 2000 y 2022, seleccionando cuatro bases de datos (Pubmed, Scopus, Scielo y Web of Science). Para identificar los descriptores se utilizó los Medical subject headings (Mesh): Tooth Wear, Composite Restorations, Resin y Oral Rehabilitation. No se aplicó restricciones de idioma, país de origen, autor o lugar de publicación donde se realizó el estudio. Como resultado de la búsqueda se obtuvieron 71 artículos, de los cuales se seleccionaron 5 que cumplieron con los criterios de elegibilidad para ser considerados en la revisión de literatura sistematizada. Se encontró un promedio de tasa de éxito ente el 89,4 % - 100 % en un promedio total de 5.2 años de seguimiento. Se puede concluir, hasta donde se tiene conocimiento en la literatura científica disponible, que el tratamiento de restauraciones adhesivas con resinas compuestas en pacientes con desgaste severo es recomendable, enfocado en un periodo a corto-mediano plazo (3-5 años), siendo una opción de tratamiento económica y mínimamente invasiva.

Severe tooth wear is described as the substantial loss of tooth structure, with dentin exposure and significant loss of equal to or more than 1/3 of the clinical crown. The use of resin composite materials allows the clinician to be more conservative, due to its minimally invasive application. In addition to this, they are relatively inexpensive, provide good general aesthetics, as well as good performance and ease of repair. The objective of this systematic literature review is to collect information available in the literature regarding the clinical performance of adhesive restorations with composite resin in cases of patients with severe wear and increase in the vertical dimension as a rehabilitation objective. Articles between the years 2000 and 2022 were analyzed, selecting four databases (Pubmed, Scopus, Scielo and Web of Science). To identify the descriptors, the Medical subject headings (Mesh) were used: Tooth Wear, Composite Restorations, Resin and Oral Rehabilitation. No language, country of origin, author or place of publication restrictions where the study was conducted were applied. As a result of the search, 71 articles were obtained, of which 5 were selected that met the eligibility criteria to be considered in the systematic literature review. An average success rate between 89.4 % - 100 % was found in a total average of 5.2 years of follow-up. It can be concluded, to the best of our knowledge in the available scientific literature, that the treatment of adhesive restorations with composite resins in patients with severe wear is recommendable, focused on a short-medium term period (3-5 years), being a Inexpensive and minimally invasive treatment option.

O condicionamento de tecido peri-implantar na reabilitação estética de próteses unitárias sobre implantes: relato de caso clínico / Peri-implant tissue conditioning in the esthetic rehabilitation of unitary prostheses on implants: Clinical case report / Acondicionamiento del tejido periimplantario en la rehabilitación estética de prótesis unitarias sobre implantes: Informe de caso clínico

Introdução:A reabilitação protética implantosuportada de espaços edêntulos na região do sorriso é um desafio para o cirurgião-dentista. Para obtenção da estética em próteses unitárias sobre implante é necessário considerar aspectos como o correto posicionamento do implante e sua harmonia com os tecidos moles e duros. Objetivo:relatar o resultado estético e funcional de um tratamento com auxílio de coroa provisória associada ao condicionamento gengival na reabilitação final com coroa unitária implantossuportada. Relato de caso clínico: Paciente MJFA, 36 anos, sexo feminino, compareceu à clínica de Prótese Dentária do Departamento de Odontologia/UFRN queixando-se de trauma dentário com perda do elemento dentário 15 e necessidade de "ficar com sorriso mais bonito". Após instalação de implante com conexão cônica e período de osseointegração, foi realizada a confecção da coroa provisória sobre implante e iniciada sessões de condicionamento gengival por meio de acréscimos com resina acrílica, utilizando a técnica de pressão gradual sob a margem gengival. Observou-se uma melhora no tecido periimplantar e um perfil de emergência adequado. O caso possui proservação de 3 anos. Conclusões:a realização de condicionamento gengival previamente a prótese final é uma etapa importante para alcançar umareabilitação com característicasestéticas e funcionais semelhantes à de dentes naturais (AU).

Introduction:Implant-supported prosthetic rehabilitation of edentulous spaces in the smile areais a challenge for dental surgeons. To achieve pleasing esthetics in single implant prostheses it is necessary to consider aspects such as the correct positioning of the implant and its harmony with the soft and hard tissues.Objective:to report the esthetic and functional results of a treatment with the aid of a provisional crown associated with gingival conditioning in the final rehabilitation with a single implant-supported crown.Clinical case report:Patient MJFA, 36 years old, female, attended the Prosthodonticsclinic of the Department of Dentistry/UFRN complaining of dental trauma with loss of tooth 15 and the need to "havea more beautiful smile". Afterinstalling an implant with a conical connection and a period of osseointegration, a temporary crown was made on the implant and gingival conditioning sessions were initiatedby means of acrylic resin augmentations, using the gradual pressure technique under the gingival margin. An improvement in the peri-implant tissue and an adequate emergenceprofile were observed. The case has a 3-year follow-up period.Conclusions:performing gingival conditioning prior to the final prosthesis is an important step in achieving rehabilitation with esthetic and functional characteristics similar to those of natural teeth (AU).

Introducción: La rehabilitación protésica implantosoportada de espacios edéntulos en el áreade la sonrisa es un desafío para el cirujano dentista. Para conseguir una buena estética en las prótesis unitarias sobre implanteses necesario tener en cuentaaspectos como el posicionamiento correctodel implante y su armonía con los tejidos blandos y duros.Objetivo: informar losresultadosestéticosy funcionalesde un tratamiento con ayuda de coronas provisionales asociado al acondicionamiento gingival en la rehabilitación final con corona única implantosoportada.Relato de caso clínico: Lapaciente MJFA, 36 años, sexo femenino, se dirigióa la clínica de Prostodonciadel Departamento de Odontología/UFRN quejándose de un traumatismodental con pérdida del diente 15 y de la necesidad de "tener una sonrisa más bonita". Después de la colocación de un implante con conexión cónica y de un período de osteointegración, se realizó una corona provisional sobre el implante y se iniciaron sesiones de acondicionamiento gingival con aumentos de resina acrílica, utilizando la técnica de presión gradual bajo el margen gingival. Se observó una mejora del tejido periimplantario y un perfil de emergencia adecuado. El caso tiene un seguimiento de 3 años. Conclusiones: el acondicionamiento gingival previo a la prótesis definitiva es una etapaimportante para conseguiruna rehabilitación con características estéticas y funcionales similares a las de los dientes naturales (AU).

Effect of aging and thermocycling on flexural strength of PEEK as a provisional restoration for full mouth rehabilitation - An In vitro study.

Introduction: To compare the flexural strength of autopolymerizing poly methyl methacrylate resins (PMMA) resin, CAD/CAM milled PMMA and CAD/CAM milled poly ether ether ketone (PEEK) when used as provisional restorative materials for long span situations in full mouth rehabilitation after aging and thermocycling. Materials and Methods: Sixty samples (25 mm × 2 mm × 2 mm) were fabricated using autopolymerizing PMMA resin (GROUP I), CAD/CAM milled PMMA (GROUP II) and PEEK (GROUP III). The groups were subdivided into A and B and subjected to 7 days of aging and 500 cycles of thermocycling (subgroup A) and 14 days of aging and 1000 cycles of thermocycling (subgroup B), respectively, and flexural strength was evaluated using a three-point bend test. The data were analyzed with student t test and pair-wise comparison of mean values was done by ANOVA. Results: The flexural strength of PEEK subjected to 7 days of aging and 500 cycles of thermocycling (III (A) - 6628.70 MPa) was the highest among all groups followed by PEEK subjected to 14 days of aging and 1000 cycles of thermocycling (III (B) - 3760.50 MPa). Conclusion: The mean flexural strength of PEEK was statistically significant than the other two materials tested and hence can be recommended for use as a provisional restorative material for long span situations in full mouth rehabilitation. However, the mean flexural strength of PEEK reduced approximately by 44% when subjected to further aging.

Evaluation of Change in Quality of Life, Dental Fear and Dental Anxiety in Young Children Following Full-mouth Dental Rehabilitation under General Anesthesia for Early Childhood Caries.

AIM: To evaluate the change in quality of life, dental fear, and dental anxiety in young children following full-mouth dental rehabilitation under general anesthesia for early childhood caries. MATERIALS AND METHODS: About 200 children who were diagnosed with early childhood caries requiring full-mouth rehabilitation under general anesthesia were recruited after obtaining parental consent. Oral health-related quality of life (OHRQoL) was measured using the Early Childhood Oral Health Impact Scale (ECOHIS). Dental fear was evaluated using Children's Fear Survey Schedule-Dental Subscale and dental anxiety was evaluated using the Facial Image Scale. Scores were taken on the day of intervention, and after 14 days when the child reported for posttreatment follow-up. RESULTS: All 200 participants returned for a follow-up visit after 2 weeks. The child impact section was reduced from 15.7 ± 4.1 to 7.7 ± 1.9 after treatment. The family impact section was reduced from 9.6 ± 2.7 to 3.5 ± 2.6 after treatment. A statistically significant difference was seen in both sections when pre-and posttreatment values were compared (p < 0.001). The total ECOHIS showed statistically significant improvement as the pretreatment score of 21.6 ± 9.5 reduced to 11.2 ± 4.2 showing 51.9% improvement in OHRQoL after full-mouth rehabilitation under general anesthesia was done (p < 0.001). Dental fear and anxiety among the participants showed a statistically significant reduction after treatment was done and most participants were found to be less fearful of doctors, dentists, and injections after treatment. CONCLUSION: Full-mouth rehabilitation was found to be a reliable treatment modality to improve the OHRQoL of children suffering from early childhood caries. CLINICAL SIGNIFICANCE: Significant improvement was seen in the OHRQoL within 2 weeks after treatment and most participants were found to be less anxious and fearful toward dentists and dental treatment. Comprehensive dental rehabilitation under general anesthesia has been proven to be an effective treatment modality for early childhood caries and a productive treatment technique to reduce dental fear and anxiety.

Associated short and regular implants for complete denture retention in an atrophic mandible: clinical follow-up / Implantes corto y regular asociados para retención de prótesis completa en mandíbula atrófica: seguimiento clínico / Implantes curto e regular associados para retenção de prótese total em mandíbula atrófica: acompanhamento clínico

Objective: to present the radiographic clinical follow-up of the prosthetic rehabilitation of a patient with an atrophic mandible, with the installation of short implants associated with an implant of regular length. Method: case report of a completely edentulous patient with an atrophic mandible and a 6-year radiographic clinical follow-up conducted at the dental clinic of the Federal University of Piauí, Teresina, from February 2011 to January 2020. After collecting sociodemographic data, health records, clinical radiographic examinations, and prosthetic surgical planning, four dental implants were installed between the mental foramina. After three months, mini-conical abutments and a fixed prosthesis screwed onto the implants were installed and monitored every six months for a period of six years. Results: the clinical evaluation revealed tissue stability without significant peri-implant changes after the follow-up period. Radiographically, bone resorption was not observed around the implant. Stability of the prosthesis and absence of prosthetic complications were observed during the follow-up period. Conclusion: short implants associated with regular-length implants can be placed in the anterior region of an atrophic mandible for rehabilitation with fixed complete dentures.

Objetivo: apresentar o acompanhamento clínico radiográfico da reabilitação protética de um paciente com mandíbula atrófica com a instalação de implantes curtos associados a um implante de comprimento regular. Método: relato de caso de uma paciente desdentada total com mandíbula atrófica, e acompanhamento clínico radiográfico de seis anos, realizado na clínica odontológica da Universidade Federal de Piauí, Teresina, no período de fevereiro de 2011 a janeiro de 2020. Após coleta de dados sociodemográficos e registro de saúde, exames clínicos radiográficos e planejamento cirúrgico protético, foram instalados quatro implantes dentários entre os forames mentonianos. Após o período de três meses foram instalados mini pilares cônicos e uma prótese fixa aparafusada sobre os implantes que foi acompanhada a cada seis meses por um período de seis anos. Resultados: as avaliações clínicas mostraram estabilidade tecidual sem alterações peri-implantares significativas após o período de acompanhamento. Radiograficamente foi observada a manutenção sem reabsorção óssea ao redor dos implantes. A estabilidade da prótese e a ausência de complicações protéticas foram observadas clinicamente durante o período de acompanhamento. Conclusão: os implantes curtos associados a implante de comprimento regular podem ser colocados na região anterior da mandíbula atrófica para reabilitação com prótese total fixa.

Managing the transition to a complex full mouth rehabilitation utilizing injectable composite.

OBJECTIVE: This article describes the use of flowable injectable composite resins to facilitate transitional treatment of a complex complete mouth rehabilitation. CLINICAL CONSIDERATIONS: Some patients require urgent and complex complete mouth rehabilitations that are time and cost intensive. Financial considerations can prevent some patients from pursuing treatment. This can result in the oral conditions worsening over time and compromising the long-term prognosis of the teeth. CONCLUSIONS: Injectable composite resins can be used as a transitional bonding material for complex cases using an injection molding technique utilizing clear indices obtained from a diagnostic waxing. This allows for a full mouth rehabilitation to be performed in a single appointment, producing instant results. CLINICAL SIGNIFICANCE: Transitioning with injectable composite as demonstrated in this case will immediately stabilize an otherwise deteriorating situation in a cost-effective way and allows patients to address the realities of financial or time constraints when transitioning to more durable porcelain restorations over a period of years.

Full-mouth rehabilitation in a completely digital workflow using partially adhesive monolithic zirconia restorations.

OBJECTIVE: This clinical case describes a completely digital workflow using current digital technologies for a full-mouth adhesive rehabilitation with ultra-translucent multilayer zirconia restorations. CLINICAL CONSIDERATIONS: A healthy 60-year-old man with abfractions on all upper and lower molars and severe tooth wear underwent a full-mouth rehabilitation with laminate veneers and partial adhesive restorations. A proper zirconia bonding protocol was realized to provide a durable bond between the ultra-translucent zirconia and the resin cement. Furthermore, the implementation of a digital workflow enables the clinician to have an effective communication during treatment planning and simplify the clinical and laboratory procedures, providing the patient with long-term esthetic treatment and functional results. CONCLUSION: The implementation of a completely digital workflow and the use of ultra-translucent multilayer zirconia for indirect adhesive restorations can be an alternative with simplified and predictable procedures for patients with dental wear and teeth discolorations. CLINICAL SIGNIFICANCE: The digital workflow described is intended to facilitate the planning and execution of a full-mouth adhesive rehabilitation and demonstrates to clinicians a reliable zirconia bonding concept for minimally invasive anterior and posterior restorations.

A Multidisciplinary Approach for Full-Mouth Rehabilitation in Oligodontia: A Clinical Report.

The absence of teeth in children due to congenital agenesis, syndromic or not, could lead to oral dysfunctions with general repercussions and sociopsychological problems. This case was a 17-year-old girl with severe nonsyndromic oligodontia who was missing 18 permanent teeth and had a class III skeletal pattern. It was challenging to provide functional and esthetically pleasing results in terms of temporary rehabilitation during growth and long-term rehabilitation in adulthood. This case report described the originality of the realization steps of oligodontia management, in 2 main parts. The osseous time by the LeFort 1 osteotomy advancement with simultaneous parietal and xenogenic bone grafting to improve a large bimaxillary bone volume, allowing future early implant placement by absence of growth of adjacent alveolar processes. The prosthetic rehabilitation with the conservation of natural teeth for proprioception and the use of a screw-retained polymethyl-methacrylate immediate prostheses to evaluate the needed vertical dimensional changes and make functional and esthetic results more predictable. This article could be retained as a technical note to manage this kind of case with the intellectual workflow and the difficulties encountered.

Full-Mouth Rehabilitation of a Patient with Gummy Smile-Multidisciplinary Approach: Case Report.

The impairment of aesthetic function leads to a decreased quality of life. An unaesthetic smile due to excessive gingival exposure demands, most of the time, a complex treatment in which the objective is the vertical reduction of the amount of exposed fixed gingiva by obtaining a complete exposure of the anatomical crown of the teeth and restoring the ideal dimensions of the biological width. This paper presents a case of a 48-year-old female patient who was unsatisfied with her aesthetics and had disturbed masticatory function due to the absence of some posterior teeth. The cone beam computed tomography was performed to evaluate the facial and dental morphology. The treatment plan included diode laser and piezo-surgery utilization for the frontal area of the upper arch and implants to restore the distal area of the lower and upper arch. Zirconia ceramic was used for the final restorations. This complex and multidisciplinary full-mouth rehabilitation lasted for two years, and the patient was pleased with the result. This case showed that a well-established treatment plan is necessary to obtain long-lasting results. The use of adequate procedures and equipment ensures a predictable result.

Full mouth oral rehabilitation of a severely worn dentition based on a fully digital workflow.

OBJECTIVE: To demonstrate the use of a complete digital workflow for a full mouth rehabilitation in a severely worn dentition. CLINICAL CONSIDERATIONS: The present case report successfully rehabilitated a full-mouth case of a severely worn dentition based on the use of digital technologies, making the diagnosis and treatment process faster, accurate and less expensive. A long-lasting esthetic and functional result are showed after 30-months follow up. CONCLUSIONS: An appropriate knowledge on dental erosion and oral rehabilitation, combined with a digital dentistry approach could lead the clinician to deliver a fast, accurate and predictable noninvasive restorative treatment in cases like the one described. CLINICAL SIGNIFICANCE: Bruxism-based severely worn dentition is being found more often in population. In this situation, a detailed diagnosis and tailored treatment are mandatory to obtain a predictable treatment outcome. In this sense, the development of adhesive dentistry, new restorative materials and the incorporation of digital technologies can create a predictable synergy to rehabilitate these types of patients with a modern and less invasive approach.

A technique for digital alignment of cross-articulated casts in a computer-aided design software program for complete-mouth rehabilitation.

With the advent of computer-aided design and computer-aided manufacturing (CAD-CAM), dental restorations are no longer fabricated in an entirely analog fashion. Successful execution of complete-mouth rehabilitations requires articulation of definitive maxillary and mandibular casts with tooth preparations, as well as cross-articulation with the patient's interim restorations. These cross-articulated records serve as a guide for the dental laboratory technician in fabricating the definitive restorations. In the CAD-CAM workflow, cross-articulation and overlaying of a patient's interim casts over the definitive casts of tooth preparations poses some challenges because of loss of common anatomic data points such as incisive papilla, rugae, and the palate. This article describes a straightforward technique to overcome this common challenge, where a dental laboratory technician can predictably overlay the digitized interim casts to allow for cross-articulation and proceed with designing and fabricating the definitive restorations.

Three-point sectional-cast digital method for transferring the interocclusal relationship for full-mouth rehabilitation of worn dentition.

For full-mouth rehabilitation of worn dentition, "diagnostic" interim restorations are required to reestablish the interocclusal relationship. It is important but challenging to transfer the interocclusal relationship and to map the basic form and contour of interim restorations to the final restorations. Alignment of interim restorations and working casts is difficult when using digital workflows because of a lack of consistent hard tissue reference points. The digital workflow presented in this study used a "3-point sectional-cast digital cross-mounting method" to transfer the interocclusal relationship during full-mouth rehabilitation. An intermediate cast was made with three interim restorations: one on an incisor and two on molars. The interocclusal relationship and occlusal morphologies of the diagnostic interim prostheses were transferred and aligned to working casts using the 3-point sectional casts.

Oral health care for older persons with Alzheimer's disease: considerations about treatment planning and caregiver involvement

Alzheimer's disease (AD) is a neurodegenerative and progressive disease that predominantly affects women and has no cure. Obstacles to the dental care of people with AD differ in each phase, but the dental surgeon should remember to include the caregivers, formal or informal, in the treatment. Some skills need to be considered in the planning process, and dental health indices can be very helpful for the professional to assess the patient's ability to undergo treatment and how the older person can benefit from it. The dental surgeon should evaluate each person's specific needs so that personalized oral hygiene protocols can be established. The suggested adaptations must be by the reality of the older adult with AD, the family context, and daily routine, and they must contemplate the information provided by the caregiver. In this article, we invite the dental surgeon to understand the continuum of AD to properly plan treatment, considering the individual's limitations, future perspectives, and safety, always keeping the older adult free of oral infections and comfortable with his or her oral health condition

A doença de Alzheimer (DA) é neurodegenerativa, de caráter progressivo, afeta predominantemente mulheres e até o momento não possui cura. Os obstáculos para o atendimento odontológico de pessoas com DA são diferentes em cada fase, porém em nenhuma delas o cirurgião-dentista pode esquecer de incluir os cuidadores, formais ou não, no tratamento. Algumas habilidades precisam ser consideradas no processo de planejamento, e os índices odontológicos podem ser de grande utilidade para que o profissional pondere sobre a capacidade de o paciente receber o tratamento e quanto ele pode se beneficiar dele. A avaliação das necessidades específicas para cada indivíduo deve ser conduzida pelo cirurgião-dentista, de forma que seja possível estabelecer os protocolos personalizados de higiene oral. As adaptações sugeridas devem estar de acordo com a realidade da pessoa com DA, de seu contexto familiar, de sua rotina diária, e devem contemplar as informações fornecidas pelo cuidador. O cirurgião-dentista deve compreender o continuum da DA para planejar adequadamente, considerando as limitações, as perspectivas futuras e a segurança do indivíduo, mantendo-o sempre livre de infecções e confortável com sua condição de saúde bucal, em colaboração com seus cuidadores, formais ou informais